<?xml version="1.0"?>
<part>
	<!-- THIS IS THE Flex rail Curved -->
	<!-- The margin of this part in stud for snaping on the grid, relative to the bitmap -->
	<SnapMargin>
		<left>0.5</left>
		<right>0.7</right>
		<top>0</top>
		<bottom>1.3125</bottom>
	</SnapMargin>

	<!-- list of connexion point (assuming that this part can connect to another one), the position of the connexion is in stud coord and relative to the origine defined above) -->
	<ConnexionList>
		<!-- the center of this part in stud is x = 46 pix / 8 pixperstud / 2 = 2,875    and    y = 67 / 8 / 2 = 4.1875 -->		
		<connexion>
			<!-- type of connexion (0=none, 1=rail, 2=road, 3=monorail standard, 4=monorail short curve) -->
			<type>1</type>
			<position>
				<x>-2.375</x>
				<y>-0.1875</y>
			</position>
			<angle>180</angle>
			<angleToPrev>191.25</angleToPrev> <!-- how much angle between this connection and the prev one in this circular list -->
			<angleToNext>168.75</angleToNext> <!-- how much angle between this connection and the next one in this circular list -->
			<nextConnexionPreference>1</nextConnexionPreference> <!-- index (0-based) in that list for connecting the next part -->
		</connexion>
		<connexion>
			<!-- type of connexion (0=none, 1=rail, 2=road, 3=monorail standard, 4=monorail short curve) -->
			<type>1</type>
			<position>
				<x>1.9</x>
				<y>0.2511</y>
			</position>
			<angle>11.25</angle>
			<angleToPrev>168.75</angleToPrev> <!-- how much angle between this connection and the prev one in this circular list -->
			<angleToNext>191.25</angleToNext> <!-- how much angle between this connection and the next one in this circular list -->
			<nextConnexionPreference>0</nextConnexionPreference> <!-- index (0-based) in that list for connecting the next part -->
		</connexion>
	</ConnexionList>
	<hull>
		<point>
			<x>0</x>
			<y>0</y>
		</point>
		<point>
			<x>44</x>
			<y>4</y>
		</point>
		<point>
			<x>46</x>
			<y>15</y>
		</point>
		<point>
			<x>39</x>
			<y>58</y>
		</point>
		<point>
			<x>33</x>
			<y>66</y>
		</point>
		<point>
			<x>0</x>
			<y>64</y>
		</point>
	</hull>
</part>