Credits:

This is pretty much a straight copy of the design of Pelleaon's SSD,
which can be found here:
http://www.flickr.com/photos/pellaeon/sets/72157630196127524/with/
7436167114/

I used the frame from nebuzzar's reproduction of Chipstar's SSD:
http://www.setechnic.com/Forum/topic6301.html

LDD conversion notes:

I had to make a few changes between physical model and digital to
persuade LDD to accept it:

* The engines and bridge are not actually joined to the model.

* The upper hull is held on with a pair of 1x1 plates with clips 
(http://www.bricklink.com/catalogItem.asp?P=6019).
These join onto the 1x2 plates with handles at the back of the model. 
These parts could not be placed correctly on the LXF file. This may be
due to the hull being slightly bent out of true on the physical model...!

Instructions: 

I have recently created PDF instructions for this model, which can be
downloaded from:

Book One: https://dl.dropboxusercontent.com/u/5251792/Book%20One.pdf

Book Two: https://dl.dropboxusercontent.com/u/5251792/Book%20Two.pdf

Copyright and disclaimer.

- Star Wars, SSD Executor and all associated imagery is copyright 
  Lucasfilm and Disney
- Original Lego design by flickr user "Pellaeon".
- This adaption of Pellaeon's design copyright David Fraser 2013.

The materials in this folder, and the PDF files linked above, are not
intended for commercial use. Do not sell copies of these PDFs,
or models based upon them.