<?xml version="1.0"?>
<part>
	<Author>FreeBee (Roland Bal) mod. by scorpy63 (rumpelmuck)</Author>
	<Description>
		<de>Bahnschranke 12V</de>
		<en>Railroad Crossing Gate 12V</en>
		<fr>Passage à niveau 12V</fr>
	</Description>
	<ImageURL>http://media.peeron.com/pics/inv/setpics/158-1.1192152146.thumb2.jpg</ImageURL>
	<OldNameList>
	    <OldName>153.set</OldName>
	</OldNameList>

	<!-- The margin of this part in stud for snaping on the grid, relative to the bitmap -->
	<SnapMargin>
		<left>1.25</left>
		<right>0</right>
		<top>3</top>
		<bottom>3</bottom>
	</SnapMargin>

	<!-- list of connexion point (assuming that this part can connect to another one), the position of the connexion is in stud coord and relative to the origine defined above) -->
	<ConnexionList>
		<connexion>
			<!-- type of connexion (0=none, 1=rail, 2=road, 3=monorail standard, 4=monorail short curve) -->
			<type>1</type>
			<position>
				<x>-8</x>
				<y>-0.125</y>
			</position>
			<angle>180</angle>
			<angleToPrev>180</angleToPrev> <!-- how much angle between this connection and the prev one in this circular list -->
			<angleToNext>180</angleToNext> <!-- how much angle between this connection and the next one in this circular list -->			
			<nextConnexionPreference>1</nextConnexionPreference> <!-- index (0-based) in that list for connecting the next part -->
		</connexion>
		<connexion>
			<!-- type of connexion (0=none, 1=rail, 2=road, 3=monorail standard, 4=monorail short curve) -->
			<type>1</type>
			<position>
				<x>7.750</x>
				<y>-0.125</y>
			</position>
			<angle>0</angle>
			<angleToPrev>180</angleToPrev> <!-- how much angle between this connection and the prev one in this circular list -->
			<angleToNext>180</angleToNext> <!-- how much angle between this connection and the next one in this circular list -->			
			<nextConnexionPreference>0</nextConnexionPreference> <!-- index (0-based) in that list for connecting the next part -->
		</connexion>
	</ConnexionList>

	<!-- Track Designer remaping data -->
	<TrackDesigner>
		<ID>730153</ID> <!-- ID of this part in Track Designer -->
		<Flag>0</Flag> <!-- 0=no flag, 1=piece is an attachment, 2=piece is used to support elevation, 3=piece is an attachment and is used to support elevation -->
		<HasSeveralGeometries>false</HasSeveralGeometries>
		<TDBitmapList>
			<TDBitmap>
				<BBConnexionPointIndex>0</BBConnexionPointIndex>
				<Type>0</Type> <!-- The type list is too long, please refer to the help file -->
				<Polarity>0</Polarity> <!-- 0=unasasigned, N=-ve, P=+ve -->
				<AngleBetweenTDandBB>0</AngleBetweenTDandBB>
			</TDBitmap>
		</TDBitmapList>
	</TrackDesigner>
</part>