Technical > Rebooting RigPi

Occasionally it is necessary to reboot RigPi. There are several ways to proceed.

RigPi: Go to Settings->System and click Reboot RigPi.

Desktop: From the App Menu, click Log Out, then Reboot.

Terminal: Enter <sudo reboot> and click Enter.

The login screen opens. Enter your username/password and click Login after RigPi boots.

If using a Keyer board, the Keyer sends 'R' as it is powered on.

The boot takes less than a minute. The green status light on RigPi blinks as data are transferred.